Related Links

• Science Fair Project Guide

Project Summary

Difficulty	8  –  10
Time required	Long (a couple of weeks)
Prerequisites	You will need a guitar, a guitar tuner, and a personal computer with sound processing software, or the ability to run and execute signal-processing programs.
Material Availability	Readily available
Cost	Average ($50 - $100)
Safety	No issues

Share this Project Idea! |

Donate to Science Buddies

Internet Safety Tips

Get educated about online safety with help from Symantec.

symantec.com/norton/familyresources

* Note: This is an abbreviated project idea, without notes to start your background research or a procedure for how to do the experiment. You can identify abbreviated project ideas by the asterisk at the end of the title. If you want a project idea with full instructions, please pick one without an asterisk.

Abstract

In this music science fair project, you will investigate the best guitar string material for your guitar. You will first need to read about the different materials, and then select three different types of strings, all of the same tension, to test. You will then to read about harmonics and overtones and the difference between them. A plucked string has an almost harmonic spectra, meaning that when you looked at its frequency spectrum or sound spectrum, you will see a series of peaks at approximate multiples of the fundamental frequency. For example, if you pluck an A-string with a fundamental frequency around 440 Hz, then you will see a series of peaks at approximate multiples of 440 Hz; that is, at 440, 880, 1320, and 1760 Hz, etc.

In your science fair project, you will first need to decide which open string to test. You can choose any string you want, but the G-string, third from the bottom or fourth from the top, is a unique case. This string is notorious for being difficult to tune and get good intonation from on a guitar. Many researchers have found that the newer carbon materials have been an improvement for the G-string. This might be something you want to investigate. Whatever string you choose, you will first need to put a test string on your guitar in the proper placement for that string, tune it with a guitar tuner, and then make open-string recordings (pluck the string several times without putting any fingers down on the finger board). You can then process your sound recordings using any free or commercial piece of sound editing software that has a spectrum analyzer. The Bibliography provides open-source software, which has a "spectrogram mode" for visualizing frequencies, and a "plot spectrum" command for detailed frequency analysis.

As you pluck the open strings, note how each string sounds to you in your lab notebook: Is it pure? Rich? Warm? Crisp? Which sound did you like best on your guitar? Then go back and compare the spectra of the different strings to see which have the most or strongest overtones and which are the most pure.

Bibliography

This source describes the different types and properties of classical guitar strings:

• Prisloe, T. (2002). How to Select the Best Classical Guitar Strings for Your Nylon String Guitars. Retrieved October 13, 2008, from http://classicalguitarbuilder.com/march_news/October_Newsletter.html

This source describes the benefits of new materials in classical guitar strings:

• Stenel, S. (n.d.). From a Guitar Maker's Notes: General Remarks on Strings for the Classical Guitar. Retrieved October 13, 2008, from http://www.stenzel-guitars.de/english/articles/strings_e.pdf

This source gives a general overview of classical guitar strings:

• Wikipedia Contributors. (2008, August 17). Classical guitar strings. Wikipedia: The Free Encyclopedia. Retrieved October 13, 2008, from http://en.wikipedia.org/w/index.php?title=Classical_guitar_strings&oldid=232521736

This source discusses the difference between harmonics and overtones:

• Wikipedia Contributors. (2008, August 17). Overtones. Wikipedia: The Free Encyclopedia. Retrieved October 13, 2008, from http://en.wikipedia.org/w/index.php?title=Overtone&oldid=244002827

This source describes what a fundamental frequency and its harmonics are:

• Wolfe, J. (2006). What is a sound spectrum? Retrieved October 13, 2008, from http://www.phys.unsw.edu.au/jw/sound.spectrum.html

This source describes the physics of plucked strings:

• Wolfe, J. (2006). Strings, Standing Waves, and Harmonics. Retrieved October 15, 2008, from http://www.phys.unsw.edu.au/jw/strings.html#plucked

This link provides free, "open-source" software with the capability for sound editing and frequency-spectrum analysis:

• Audacity Developer Team. (2000, May). The Free, Cross-Platform Sound Editor. Retrieved October 16, 2008, from http://audacity.sourceforge.net/

Variations

• For more science project ideas in this area of science, see Music Project Ideas.

Last edit date: 2008-10-27 20:00:00

Career Focus

If you like this project, you might enjoy exploring careers in Music.

Sound Engineering Technician Any time you hear music at a concert, a live speech, the police sirens in a TV show, or the six o'clock news you're hearing the work of a sound engineering technician. Sound engineering technicians operate machines and equipment to record, synchronize, mix, or reproduce music, voices, or sound effects in recording studios, sporting arenas, theater productions, or movie and video productions.

Join Science Buddies Become a Science Buddies member! It's free! As a member you will be the first to receive our new and innovative project ideas, news about upcoming science competitions, science fair tips, and information on other science related initiatives. Support Science Buddies If this website has helped you, won't you consider a small gift so we may continue developing resources to help teachers and students?